KTI Networks KF-16M Manuel d'utilisateur télécharger pdf (Page 22)

3.2 Hub Stack Connection

A hub stack composed of multiple hubs (up to four) cascaded together

as the instruction in section 2.4 can be treated as a single dual-speed hub

which provides up to 64 dual-speed ports.

If interconnection of the 10M network and the 100M network is re-

quired, one and only one KF-16MS is needed to be installed in a hub

stack to bridge the intertraffic between the 10M network and the 100M

network.

A hub stack still complies with IEEE 802.3u Class II specifications.

Only one connection to another Class II hub via UTP cable is allowed

for a hub stack. The following figure illustrates the maximum network

span containing two hub stacks:

Figure 3-6 Connecting Two Hub Stacks

Two hub stacks are interconnected using a UTP cable between two hub

ports. Each hub stack is composed of four hubs. Two end stations are

located 205 meters apart from each other.

1 2 ... 17 18 19 20 21 22 23 24

Pas de commentaire

KTI Networks KF-16M Manuel d'utilisateur Page 22