Kti-networks DH-8T Manuel d'utilisateur télécharger pdf (Page 9)

3. Making Network Connections

Network Connectors

The hub has 8 TP ports which are presented by 8 RJ-45 jacks. The

jacks labeled 1 through 8 are permanently configured as 10Base-T

MDI-X jacks and the jack labeled '8C' next the jack labeled '8' is an

alternative jack which is configured as MDI jack for the TP port #8.

Both jacks can not be used at the same time.

The MDI-X jacks can support connections to 10Base-T Ethernet

nodes or lower level hubs via 10Base-T UTP cables. The MDI jack

'8C' is used for connecting to an upper level hub.

A 10Base-T UTP cable can be a Category 3, 4, or 5 unshielded

twisted-pair cable with an RJ45 plug at each end.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Kti-networks DH-8T Manuel d'utilisateur Page 9