KTI Networks KC-300D-SL2A Guide d'installation télécharger pdf (Page 15)

-15-

2.4 Making TP Port Connection

TP port is featured to support connection to :

• Auto-negotiation devices

• Auto-negotiation incapable 10BASE-T devices

• Auto-negotiation incapable 100BASE-TX devices

Network Cables

10BASE-T: 2-pair UTP Cat. 3,4,5 , EIA/TIA- 568 100-ohm STP

100BASE-TX: 2-pair UTP Cat. 5, EIA/TIA-568 100-ohm STP

Link distance: Up to 100 meters

Configuration Setup

To make a proper connection, the following configuration settings are

recommended:

TP port link partner SW1 SW2 SW3

Auto-negotiation device Off: auto Off: full duplex Off: 100M

Fixed 10M half duplex device On: forced On: half duplex On: 10M

Fixed 100M half duplex device On: forced On: half duplex Off: 100M

Fixed 10M full duplex device On: forced Off: full duplex On: 10M

Fixed 100M full duplex device On: forced Off: full duplex Off: 100M

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21

Pas de commentaire

KTI Networks KC-300D-SL2A Guide d'installation Page 15