KTI Networks 10BASE-T Manuel d'utilisateur télécharger pdf (Page 14)

Connecting to Computers

The RJ-45 connectors labeled 1X to 8X can be used for connecting

to the network adapter installed in a computer. The network adapter

can be a 10BASE-T adapter, a 100BASE-TX adapter, or a 10/100

dual-speed NWay adapter. The following table lists the cables used

for connecting to different network adapters:

Adapter connected UTP cable used Maximum length

10BASE-T adapter Category 3, 4 or 5 100 meters

100BASE-TX adapter Category 5 100 meters

10/100 NWay adapter Category 5 100 meters

The link from the hub to a 10/100 NWay adapter card is established

as a 100M connection.

Connecting to Network Switch Ports

The hub can support connections to Ethernet switches or Fast

Ethernet switches. Make sure the MDI-X to MDI-I connection

rule is followed when using straight-through UTP cable. The fol-

lowing table lists the cable and the cable length allowed for the

connections to different switch devices:

Switch connected UTP cable used Maximum length

10BASE-T switch port Category 3, 4 or 5 100 meters

100BASE-TX switch port Category 5 100 meters

10/100 NWay switch port Category 5 100 meters

The link between the hub and a 10/100 NWay switch port is estab-

lished as a 100M connection.

1 2 ... 9 10 11 12 13 14 15 16 17

Pas de commentaire

KTI Networks 10BASE-T Manuel d'utilisateur Page 14