KTI Networks KFS-0540 Guide d'installation Page 1

KFS-0540Industrial 5-Port Fast Ethernet Switch Installation Guide-1- DOC.091111

2.3 Mounting the Switch to a Din-Rail In the product package, a DIN-rail bracket is provided or has been installed for mounting the switch in a indust

3. Clamp the unit to the DIN rail and make sure it is mounted securely. The final dimension is: -11-

2.4 Mounting the Switch on a Panel The switches may be provided optionally with a panel mounting bracket. The bracket supports mounting the switch o

2. Screw the bracket on the switch unit. 3. Screw the switch unit on a panel and the locations for screws are shown below: -13-

2.5 Applying Power The switch provides two types of power interfaces, terminal block and DC power jack for receiving DC power input from external powe

2.5.1 Using Terminal Blocks 3P ContactsVin Positive (+) terminal Vin Negative (-) terminal Chassis ground 3P Terminal PlugA plug is provided together

2.5.2 Using DC Power Jack When an external power system is not available, the switch provides a DC jack to receive power from typical AC-DC power adap

-17- 3. Making LAN Connections 3.1 10/100 Copper Ports The 10/100 RJ-45 copper ports support the following connection types and distances: Network Cab

(C) 2009 KTI Networks Inc. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any direct

The information contained in this document is subject to change without prior notice. Copyright (C) All Rights Reserved.TRADEMARKSEthernet is a regist

-4- Table of Contents 1. Introduction...

1. Introduction The switch provides five 10/100Mbps copper ports for connections to Ethernet and Fast Ethernet devices. With the featured auto-negotia

1.1 Features z Auto MDI/MDI-X crossover function on the copper port z Support IEEE 802.3x flow control for full-duplex operation z Support Back-pressu

-7- 1.3 LED Indicators LED FunctionPOWER Power status1 - 5 Port 1 – Port 5 LINK Link and activity status (Port 1 - Port 5) 100M 100Mbps speed status

-8- Mounting Din-rail mounting Panel mounting (optional) EnvironmentalOperating Temperature Typical -10oC ~ +70oCStorage Temperature -20oC ~ +85oCR

-9- 2. Installation 2.1 Unpacking The product package contains: z The switch unit for Din-rail mounting z One product CD-ROM 2.2 Safety Cautions To re