KTI Networks KS 2028 Manuel d'utilisateur télécharger pdf (Page 11)

2.3 Front Panel and Rear Panel

Figure 2-4 Components on the Front and Rear Panel

• Eight 10BASE-T switched ports (Port #1 to Port #8)

Each port consists of an RJ-45 connector and is used for connec-

tion to a 10BASE-T hub or node.

• One 10/100BASE-TX switched port (Port #9)

The port consists of an RJ-45 connector and is used for connection

to a 10BASE-T or 100BASE-TX device (hub or node).

• Crossover switches for Port #8 and Port #9

Each crossover switch is provided for configuring the pin assign-

ments of the associated RJ-45 connector.

• One expansion port slot (Port #10)

The port slot can accommodate one optional port module. Two

types of port modules can be selected. One is a 10/100BASE-TX

port module and the other is a 100BASE-FX port module. Refer to

section 2.4 for how to install the module into the slot.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 20 21

Pas de commentaire

KTI Networks KS 2028 Manuel d'utilisateur Page 11