KTI Networks KSD-800M Manuel d'utilisateur télécharger pdf (Page 59)

-59-

QoS Global Settings Description

802.1p high priority threshold 802.1p High Priority Tag Setting for 802.1p classification

Valid values : 0 - 7

Egress service policy Weighted Round Robin ratio:

4:1 - 4 high priority packets then 1 low priority packet

8:1 - 8 high priority packets then 1 low priority packet

16 :1 - 16 high priority packets then 1 low priority packet

Always high first - Packets in high priority queue are sent first

until the queue is empty

Specific DSCP(A) Enable - Enable user defined DSCP(A) checking

Disable - DSCP(A) classification is not applied.

Specific DSCP(A) Value Enter user defined DSCP(A) value for classification.

Specific DSCP(B) Enable - Enable user defined DSCP(B) checking

Disable - DSCP(B) classification is not applied.

Specific DSCP(B) Value Enter user defined DSCP(B) value for classification.

Specific IP & Mask (A) If a received IP packet’s source address or destination address

belongs to the user defined IP network addresses. The packet is

classified as high priority.

Enable - Enable user defined IP(A) network address checking

Disable - IP(A) classification is not applied.

Specific IP Address (A) Enter user defined IP(A) address for classification.

Specific Mask (A) Enter user defined IP(A) subnet mask for classification.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 65

Pas de commentaire

KTI Networks KSD-800M Manuel d'utilisateur Page 59