KTI Networks Managed Fast Ethernet switches Manuel d'instructions télécharger pdf (Page 41)

-41-

VLAN Global Settings Description

802.1Q Tag Aware Mode Enable - Under this mode, the switch will check the content of

every received packets. For 802.1Q tagged packets, the tagged VID

on the packet is used to look up the VLAN group table and find the

group whose VID matches the packet tagged VID.

Disable - Under this mode, the switch does not check the contents

of the received packets. The default VLAN group indexed by the

ingress port is used directly for further VLAN operation.

Ingress Member Filtering Mode Enable - Drop packet if the ingress port is not the member port of

the VLAN group

Disable - No ingress member filtering is applied

Select [4] VLAN Group Member Settings to configure member ports for VLAN groups.

Input Description

Groups Specify group list to be configured. More than one group can be configured at the same

time. Examples:

123 - Group 1, Group 2, Group 3

1 2 3 - Group 1, Group 2, Group 3

1,2,3 - Group 1, Group 2, Group 3

Ports Enter port list for the selected groups

Examples:

123 - Port 1, Port 2, Port 3

1 2 3 - Port 1, Port 2, Port 3

1,2,3 - Port 1, Port 2, Port 3

Select [5] VLAN Group VID Settings to configure VLAN ID for VLAN groups.

VID Setting Description

Groups Select group list to be configured.

VLAN ID Enter VLAN ID for the selected groups

Valid values : 1 - 4095

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 71 72

Pas de commentaire

KTI Networks Managed Fast Ethernet switches Manuel d'instructions Page 41