KTI Networks Nway switch fiber 10/100, Fx Guide d'installation télécharger pdf (Page 12)

-12-

Cables

Depending on the connection speed, use the proper UTP cables:

Speed Cables used Distance

100M Cat. 5, 5e, or higher grade 100 meters

10M Cat. 3, 4, 5, 5e, or higher grade 100 meters

Auto-MDI-X Function

An Auto-MDI-X function will automatically detect if a crossover is re-

quired and make the swap of Tx pair and Rx pair internally. With this

function, straight-through cable can be used for any connection. MDI to

MDI-X connection rule is not necessary anymore. In the switches, all TP

ports are equipped with this function. You can use just straight-through

type of cables for all your connections.

3.3 Making Fiber Connection

For different fiber connections, several alternative models can be

selected for different fiber connections. Refer to Section 1.2 for the

model selection. The following figure illustrates a connection example

between two SC fiber ports:

1 2 ... 7 8 9 10 11 12 13 14

Pas de commentaire

KTI Networks Nway switch fiber 10/100, Fx Guide d'installation Page 12