KTI Networks KG-500F Guide d'installation télécharger pdf (Page 12)

LED Indicators

The adapter has three LEDs. The interpretations of the LEDs are:

LINK LED indicates an active 1000Mbps connection is established.

On : Good link between the adapter and a remote device

Off : No connection between adapter and a remote device

Blink: Link on and traffic activities

SFP LED indicates installation status of mini-GBIC transceiver

On : A mini-GBIC SFP transceiver is installed in the SFP slot.

Off : No transceiver is installed.

OL LED indicates optical signal status

On : Optical signal is detected.

Off : No optical signal is detected.

If you experience any problems, first make sure that the appropri-

ate driver is loaded, the proper cable is connected to the connector,

and the connected device complies with 1000BASE-X standard.

Then recheck the LED.

1 2 ... 7 8 9 10 11 12

Pas de commentaire

KTI Networks KG-500F Guide d'installation Page 12