Kti-networks DH-8T Manuel d'utilisateur télécharger pdf (Page 11)

When the number of 10Base-T nodes in your network exceeds eight,

you need to connect at least two hubs to integrate all 10Base-T nodes

into one network. You may connect one hub to another hub by using

an ordinary UTP cable as the following steps:

1. Connect one end of the UTP cable to the jack labeled '8C' of

Hub A.

2. Connect the other end of the cable to any available MDI-X jack

of Hub B.

The maximum length of the UTP cable connecting two hubs is 100

meters.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Kti-networks DH-8T Manuel d'utilisateur Page 11