KTI Networks Switch 10/100/1000 Base-T Guide d'installation télécharger pdf (Page 17)

-17-

3.2.3 VLAN Mode Configuration

The switch supports Port-based VLAN and 802.1Q Tag-based VLAN. Support 24 active VLANs and

VLAN ID 1~4094.

Parameter description:

VLAN Mode Disable - Stop VLAN function on the switch. In this mode, no VLAN is applied

to the switch. This is the default setting.

Port-based - Port-based VLAN is defined by port. No filtering criterion applies

in port-based VLAN. The only criterion is the physical port you connect to.

Tag-based - Tag-based VLAN identifies its member by VID. This is quite

different from port-based VLAN. Each tag-based VLAN you built up must be

assigned VLAN name and VLAN ID. Valid VLAN ID is 1-4094.

Metro Mode - The Metro Mode is a quick configuration VLAN environment

method on Port-based VLAN. It will create 22 or 23 Port-based VLAN groups.

Up-link Port This function is enabled only when metro mode is chosen in VLAN mode.

23 - Except Port 23, each port of the switch cannot transmit packets with each

other. Each port groups a VLAN with Port 23, thus, total 23 groups consisting of

2 members are formed.

24 - Except Port 24, each port of the switch cannot transmit packets with each

other. Each port groups a VLAN with Port 24, thus, total 23 groups consisting of

2 members are formed.

23&24 - Except Port 23 and Port 24, each port of the switch cannot transmit

packets with each other. Each port groups a VLAN with Port 23 and Port 24,

thus, total 22 groups consisting of 3 members are formed.

This switch can support up to maximal 24 port-based VLAN groups or 24 Tag VLAN groups.

Management Interface:

State It works when the tag-based mode is chosen. When this function is enabled, only the

tagged packets with this VID can manage the switch.

VID Valid range 1~4094.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 39 40

Pas de commentaire

KTI Networks Switch 10/100/1000 Base-T Guide d'installation Page 17